Advanced Window Films has 15 years experience in providing fully indemnified professional glazing risk assessment and blast mitigation window film installation.

Blast Mitigation Window Film can save lives and protect property from flying glass in the event of an industrial explosion or a terrorist attack. Blast Mitigation Window Film: Deciding the level of protection you need Selecting the correct blast mitigation window film specification for your specific threat is vitally important. Different types and levels of threat will require different solutions. In the case of explosions, it is not possible to eliminate the risk, but we can help mitigate it. It is however possible to eliminate the potential risk from overhead glass.

The characteristics of a chemical explosion differ from those of a bomb blast. For example, blast duration from a petro chemical explosion is of a longer duration than a small bomb close to a window. Bomb blast peak is instantaneous whereas vapour cloud is of a much longer duration and lower peak pressure, depending on the amount of fuel. Certainly, the most important factor will be the load of the explosion. Distances and charges should then be taken into account.

Advanced Window Films have extensive experience in Risk Assessment to identify site specific solutions for protecting against the potential threats from explosion.

Daylight Application

A conventional daylight application of Blast Mitigation Window Film to the inside of the glass will often provide a sufficient level of protection. This can be enhanced by the application of silicone to bond all the glass edges to the window frame if necessary. The thickness of the blast mitigation window film can be between 100 microns and 350 microns depending on the area and thickness of the glass and the protection required.

Wetglaze Application

The next level of protection would be a wetglaze application of blast mitigation window film to the inside of the glass bonded to the window frame with a high performance Dow Corning 995 Silicone. Again, the thickness of the blast mitigation window film can be between 100 microns and 350 microns depending on the area and the thickness of the glass and the protection required.

Mechanical Anchorage Systems

For even greater threats, there is a range of mechanical anchorage systems available. There are catching systems, restraint systems and clamping systems, all used in conjunction with the appropriate thickness of blast mitigation window film. These systems can also be used to protect against the potential risk from overhead glass. For more detailed information on mechanical anchorage systems go to our mechanical anchorage systems page now.

Professional Expertise

We will help you identify the risks in your specific case. We will then agree the level of blast mitigation you wish to achieve. We will then recommend the most effective solutions using only products tested and approved to the relevant BS, European and International Standards.

For more information about Anti Graffiti Window Film call 01 5241418

Advanced Window Films

The leading window film specialists in the Ireland

As accredited dealer/installers for most of the major window film manufacturers in the world, we have access to the widest range of quality tested and approved products, because of this we are best placed to independent advice and find the very best solution to your particular needs.

Other Window Film Types